|
Table 3 for information requirements for electric local space heaters |
P |
||||||||
|
Contact details: |
Guangdong Invitop Technology Co., Ltd. 2F-201 & 3F, Area A1, Minsen Information Technology Industrial Park, No. 8, East of Jinsan Avenue, Sanjiao Town, Zhongshan, Guangdong, China |
||||||||
|
Model identifier(s): |
Lucas-ENFG3A |
equivalent models: |
Lucas-ENFB3A, Lucas-ENFW3A, Vega-ENFG3A, Vega-ENFB3A, Vega-ENFW3A |
||||||
|
Item |
Symbol |
Value |
Unit |
Item |
Unit |
||||
|
Heat output |
Type of heat output/room temperature control (select one) |
||||||||
|
Nominal heat output |
Pnom |
1,750 |
kW |
Single stage heat output and no room temperature control |
[no] |
||||
|
Minimum heat output (indicative) |
Pmin |
0,930 |
kW |
Two or more manual stages, no room temperature control |
[no] |
||||
|
Maximum continuous heat output |
Pmax |
1,750 |
kW |
With mechanic thermostat room temperature control |
[no] |
||||
|
Power consumption |
With electronic room temperature control |
[yes] |
|||||||
|
In off mode |
Po |
N/A |
W |
Electronic room temperature control plus day timer |
[no] |
||||
|
In standby mode |
Psm |
0,45 |
W |
Electronic room temperature control plus week timer |
[no] |
||||
|
In Idle mode |
Pidle |
0,39 |
W |
Other control options (multiple selections possible) |
|||||
|
In network standby |
Pnsm |
N/A |
W |
Room temperature control, with presence detection |
[no] |
||||
|
Standby mode with display information or status |
no |
Room temperature control, with open window detection |
[no] |
||||||
|
Seasonal space heating energy efficiency in active mode |
ηS,on |
91,5 |
% |
distance control option |
[no] |
||||
|
|
|
|
|
adaptive start control |
[no] |
||||
|
|
|
|
|
working time limitation |
[yes] |
||||
|
|
|
|
|
black bulb sensor |
[no] |
||||
|
|
|
|
|
self-learning functionality |
[no] |
||||
|
|
|
|
|
control accuracy |
[no] |
||||
|
Remark: For electric local space heaters, the declared seasonal space heating energy efficiency ηS,on cannot be higher than the measured value at the nominal heat output of the unit. |
|||||||||
2.Maintenance
Notice:
- Always turn off and unplug before cleaning.
- Use a soft, dry cloth to gently wipe clean the outer surface.
- Use a soft, dry cloth or a cotton-tipped swab to remove any dust from the air inlet & outlet.
Tips: Never use chemical solvents such as benzene, alcohol or gasoline, otherwise, the machine casing may be damaged or even deformed.
3.Disposal
4.FAQ
|
PROBLEM |
REASON |
SOLUTION |
|
Malfunction codes on LED display |
E2 - Temperature sensor short circuit |
Unplug it from the power source and contact Customer Support. |
|
E1 - Temperature sensor open circuit |
Unplug it from the power source and contact Customer Support. |
|
|
FF - Overheat Protection |
Unplug and wait for it to cool down before plugging in again. |
|
|
P4 - Tip-Over Protection |
Place the heater back on a flat, level and stable surface. |
|
|
Heater does not start |
Power cord is not properly plugged in. |
Connect the plug to a powered electrical outlet. |
|
Overheat protection has been activated. |
Unplug and allow it to cool. Remove any objects on or near the heater. |
|
|
Heater does not start |
No power is passing through the unit. |
Ensure that your circuit breaker or fuse is working properly. Ensure that your heater is placed on a flat and even surface. |
|
The set temperature is lower than the ambient temperature. |
Ensure that the temperature is set to be higher than the ambient temperature. |
|
|
The heater suddenly stops during heating. |
The temperature exceeds the threshold of the thermal cutoff. |
Turn off and unplug the unit. Allow it to cool and plug into the electrical outlet again. |
|
The heater is tipped over. |
Place it on a flat, level and stable surface. |
|
|
In ECO mode, the heater will turn off automatically when the set temperature has been reached. |
This is normal. If your heater turns off frequently, please raise the set temperature, or switch to Power Heat mode. |
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.